Tag: Mechanics

Effects of Material on Braking Abilities
12th Dec 2019
Introduction: Abstract: The most important utility in our lives as of today is automobiles, there is a lot of research and development is going in every section of the automobile field to give the safest possibl...

Development of Aircraft Maintenance Programme
12th Dec 2019
Introduction: 1.0 Introduction. The aircraft maintenance scheduling process is very detailed and encompasses the inputs of various departments of an airline. The maintenance programme needs to be efficient and cos...

Development of Environmentally Friendly Amphicar
12th Dec 2019
Introduction: AMPHICAR II – System Specifications 1 Statement of work Our team has aimed to produce an energy efficient, environmental friendly personal consumer vehicle that is capable of travelling on road...

Development of Parallel Parking System
12th Dec 2019
Introduction: Executive Summary Introduction/Background Traditionally development of microprocessor based control systems involved the following steps. The control algorithm was designed by a systems or a control e...

Thin Turbulent/Non-turbulent Interface Separating the Turbulent Region from the Irrotational Fluid
11th Dec 2019
Introduction: Abstract In this numerical study, the thin turbulent/non-turbulent interface separating the turbulent region from the irrotational fluid is studied by the means of direct numerical simulation of a de...

Effectiveness of O-bridged Cationic Gemini Surfactants as Corrosion Inhibitors for Stainless Steel in 3M HCL
11th Dec 2019
Introduction: Effectiveness of O-bridged cationic gemini surfactants as corrosion inhibitors for stainless steel in 3M HCl: experimental and theoretical studies Abstract Four novel cationic gemini surfactants with...

Surface Material Effectiveness in Reducing the Impact Force of a Collision
11th Dec 2019
Introduction: Physics EEI The collision of playground surface Table of Contents 1. Introduction Hypotheses Aim 2. Background Rebounding Impulse Collision Momentum, impulse and energy conversion Newton’s sec...

Automotive User Experience Design
11th Dec 2019
Introduction: Recent developments in vehicle autonomy are shifting the driving experience paradigm. What previously was a secondary task or activity is now growing into a primary concern for designers. Even though...

Short Term Isothermally Aged Doped Lead Free Solder Reliability
10th Dec 2019
Introduction: Short Term Isothermally Aged Doped Lead Free Solder Reliability subjected to Mechanical Testing with Semiparametric Estimation ABSTRACT This paper discusses the performance of lead (Pb) free allo...

Detecting Corrosion in Gas Pipelines
10th Dec 2019
Introduction: ABSTRACT   INTRODUCTION Gas pipeline transports the gas from a processing plant to distribution centers, under a high pressure environment which run under the ground in a safe environment.  Pipelin...

Tool Wear Mechanisms in Machining of Ti-6Al-4V
10th Dec 2019
Introduction: Investigating Tool Wear Mechanisms in Machining of Ti-6Al-4V Using Coolant, Dry and Minimum Quantity Lubrication (MQL) Conditions Abstract The objective of this study is to identify and explain the ...

Vehicle Stability Control Systems
10th Dec 2019
Introduction: 1 To respect the design of the well tuned passive vehicle, the proposed controller will not stabilize the vehicle during steady state maneuvers. So no ZSS for the whole operating range of the vehicle...

Extension of the Advance REACH Tool (ART) to Include Metal Welding Fume Exposure
10th Dec 2019
Introduction: Extension of the Advance REACH Tool (ART) to include Metal Welding Fume Exposure Table of Contents 1. Introduction 2. Research Questions 3. Research Objectives 4. Background 4.1 Welding 4.2 Type of ...

Factors that Influence the Mechanical Properties of Extruded Nylon Medical Device Tubing
9th Dec 2019
Introduction: To Investigate the Factors that Influence the Mechanical Properties of Extruded Nylon Medical Device Tubing Abstract The aim of this project was to investigate the factors that can change the mec...

Design of a Compressor Assembly Removal Tool to Service the Clutch, Compressor and Replace the Belt
9th Dec 2019
Introduction: The design of a compressor assembly removal tool to service the clutch, compressor and replace the belt Abstract This is a final year Mechanical Engineering project. This project is being conduct...

Performance Evaluation of Automotive Engines
9th Dec 2019
Introduction: Performance indicatorsEngine Performance Main objectives Order of objectives Intake Timing Compression Exhaust Engine assumptions Task 1 – Single cylinder model Task 2 – 2 litre naturally aspirat...

Powder Diffraction of Thermoelectrical Materials
9th Dec 2019
Introduction: Powder Diffraction of Thermoelectrical Materials Abstract Termoelectrical (TE) materials are important for alternative technologies because it can transfer waste heat to electricity directly. As a res...

Mechanical Efficiency Prediction Methodology of the Hypocycloid Gear Mechanism
9th Dec 2019
Introduction: Mechanical Efficiency Prediction Methodology of the Hypocycloid Gear Mechanism for Internal Combustion Engine Application Abstract Mechanical friction power loss is one of the main concerns in the in...

Investment into Two 7.500 cbm LNG Fuelled Bunker Vessels for Long-term Time Charter
9th Dec 2019
Introduction: Investment into two 7.500 cbm LNG fuelled Bunker Vessels for long-term Time Charter Cass Schiffahrtsgesellschaft GmbH & Co. KG Contents Table of Figures Executive Summary 1. Strategy and Market ...

Quenching and Partitioning on Grade 91 Stainless Steel
9th Dec 2019
Introduction: 1.1 Project Background Steel is one of the primary materials in today’s world, as a result, more than 2700 variety of steels have been made. To make the better living standard, it is necessary to f...

Impact and Fatigue Loading on Cold-worked Aluminium Specimen
9th Dec 2019
Introduction: EXPERIMENTAL INVESTIGATION OF IMPACT AND FATIGUE LOADING ON COLD-WORKED ALUMINIUM (AA6063) SPECIMEN ABSTRACT The purpose of this project work was to investigate experimentally, impact and fatigue l...

Predicting Burst Strength of Corroded Steel Pipes
9th Dec 2019
Introduction: ABSTRACT With aging, steel pipelines for oil and gas transmission undergo corrosion defects that may compromise the integrity of such structure. This work presented a review on most common type of co...

Buckling Behaviour of Different Geometrical Property
9th Dec 2019
Introduction: I.                    INTRODUCTION A.                 OBJECTIVE The objective of this work is to put forward an analysis and comparison of buckling behaviour of two...

Flexible Thermoelectric Generators Using Nanoparticle Thin Films
9th Dec 2019
Introduction: Flexible Thermoelectric Generators Using Nanoparticle Thin Films Introduction Thermoelectric generators have the astounding capability to produce electricity based on a temperature difference.  In ...

Lower Carbon Emissions from Motor Vehicles for the Future
9th Dec 2019
Introduction: Assessment Title: Information Search & Literature Review Literature Review Topic: Lower Carbon Emissions from Motor Vehicles for the Future. ABSTRACT This is a literature review done to know the ...